CADWorx Webinar: Improvements with Catalogue Development and Spec Editing in CADWorx 2015 - November 20, 2014


  Event Details


Dear Arief,

Join us during this webinar, presented by Plant Design Solutions, and get a live look into the enhancements made within the spec editor in CADWorx 2015.

For the EPC’s working with CADWorx 2015 Specification Editor, facilitating the spec creation process will encourage more designers to work on same platform, and provide better drawing and reporting consistency. OO's working with CADWorx 2015 Spec Editor will quantify the creation of project specifications early in design and project management stages, allowing for flexibility with consultant recommendations, the ability to easily modify specs and keep projects moving forward.

Discover how you can make use of these enhancements and standardize the design teams to keep projects on schedule, while reducing hours allocated for clean-up and document control.

Marketing Division
Neon Infotech SEA Co.Ltd.


Date: November 20, 2014
Time: 10AM CT time converter
Duration: 30 min.
Cost: Free e-seminar


Register for this webinar here


  Featured Speaker


Trefor Hay
Applications Specialist
Plant Design Solutions








GetSmart! Webinar: CADWorx Webinar Series




Dear Customer,

You are invited to attend the Intergraph® CADWorx® Refresher Course, a three-part webinar series that will prepare you for all your challenges in small-to-medium-sized plant design in 2015.

Join us on one or all of these webinars to learn why CADWorx 2015 is the most trusted plant design solution available on the market today.

Webinar #1 (Wednesday 19 November, 2014)
What's New in CADWorx 2015
Presented by Dominik Hepp, Product Manager - CADWorx

Discover the new capabilities and enhancements in CADWorx 2015 and how they can benefit you today. This session will provide an overview of the functional enhancements and strategic initiatives brought to you with the CADWorx 2015 release.


1pm AEST



Wednesday 19 November, 2014

Webinar #2 (Wednesday 3 December, 2014)
CADWorx: Plant Design Made Easy
Presented by Tox Llaguno, Regional Consultant - CADWorx

  • Leverage the advanced pipe routing capabilities of CADWorx to speed-up model generation.
  • Easily edit piping specifications without leaving the drawing session.
  • Generate MTOs and take advantage of ISOGEN® to produce industry-standard isometrics from your 3D model.
  • Transfer the model to pipe stress analysis and send it back to the 3D model.



1pm AEST



Wednesday 3 December, 2014

Webinar #3 (Wednesday 10 December, 2014)
CADWorx: Isometrics Made Easy
Presented by Tox Llaguno, Regional Consultant - CADWorx

Included as part of CADWorx, ISOGEN is the industry-standard for producing isometric drawings. A new interface grants you absolute control over ISOGEN settings. See the isometric update in real-time as settings are modified. This session will demonstrate the advantages of using ISOGEN against other isometric managers.


1pm AEST


Wednesday 10 December, 2014






Note: Please register with your business e-mail address for verification purposes.

Feel free to forward this message to your colleagues so they can also benefit from attending this informative webinar!













PV Elite Webinar: General Corrosion

Dear Customer,

As a plant engineer, you've talked to an inspector who has found corrosion damage in a pressure vessel at the plant. The plant manager has asked you to provide a report and a proposal for a path forward with considerations to certain time dependencies and budget, as well as safety regulations. How will you analyze this corrosion and justify your recommendation?.

In this webinar, we will discuss:

  • The concepts of the General Corrosion Assessment: API 579, Part 4. 
  • Measurement data
  • All the different calculations involved in a Level 1 and Level 2 assessment
  • Acceptance criteria and remaining life

We trust you'll find this webinar to be informative and useful.

Sangita Rivera
Marketing, Intergraph CADWorx & Analysis Solutions









Date: October 30, 2014

Time : 10AM CT   Click here for your local time

Duration: 1 hr.

Cost: Free e-seminar



Register for this webinar here






Featured Speaker










Kristin Coyle
Software Engineer







Be a part of a community of PV Elite & TANK users! Sign up for our PV Elite & TANK technical user forum on LinkedIn to connect with other users and to speak with PV Elite & TANK personnel!






GetSmart! Webinar: ISOGEN® – Isometrics made easy


Don't miss this Intergraph GetSmart! webinar 
ISOGEN® – Isometrics made easy


Just a reminder to register for the upcoming free webinarto find out why ISOGEN® makes generating isometrics easy.

Isometrics are one of the critical final deliverables of a project and can place the project in jeopardy if the outputs are inaccurate or fail to generate. ISOGEN has become the worldwide industry standard for isometrics and has been adopted by many other design systems. Its easy to use tools are able to quickly and accurately generate isometrics that are matched to your requirements – saving your company hundreds of work hours by ensuring projects are delivered on time and budget. 

During this webinar you will learn how ISOGEN leverages the hard work that has already been done by the CADWorx® development team to automatically create isometric drawings based on custom settings. We will also look at how large number of spools can be managed using SmartPlant Spoolgen. 

Want to learn more? Register for the webinar to discover why ISOGEN is the easy choice for generating isometrics.



About the webinar

Date: Thursday 23 October
Time: 2-3pm AEDT

Himanshu Patel,
Cortex Engineering Software

Contact Us:

If you have any questions or would like more information please contact us.


Note: A time zone conversion chart is available on the registration page. Please register with your business e-mail address for verification purposes.

Feel free to forward this message to your colleagues so they can also benefit from attending this informative webinar!


CADWorx® 2015 Now Released!

Intergraph is excited to announce the release of CADWorx 2015, the next generation software solution for plant design and automation. This release's ease of use, flexibility, scalability, and inter-connectivity, improves plant design effectiveness by utilizing P&ID synchronization, intelligent modelling, and automatic production of design deliverables.


View the What's New in CADWorx 2015 webinar, click here.


CADWorx 2015 updates include:

  • Routing of Mitered Elbows is now possible
  • Skewed pipe has been added
  • Male x Female Needle Valves are now included
  • Custom Field default values can be set in the model
  • A new “List” data type has been added
  • New tables are now available in the Spec Editor
  • ISOGEN has a brand new setup interface

An AutoCAD-based system, CADWorx 2015 release incorporates CADWorx Design Create which allows the creation of .iFV files for viewing, sharing and reviewing CADWorx design models on the Apple® iPad using free Intergraph® FreeView®.

To find out more about the CADWorx 2015 enhancements and how you can get your copy of this latest release, click here.


© Copyright 2014 Intergraph Corporation |